C1400/1700/1900-1
Roll Paper Sheeter (Single Roll)
Feature Introduce
C-1400/1700/1900-1 type roll cutting machine adopt advanced technology from Germany and Britain, the most important transmission system is driven by AC servo motor, ensure the cutting fast, continuous and stable. The main high-speed transmission of the cutter holder and cutter parts are adopted by Germany precision bearing. At the same time, to make sure the cutting accuracy and the life of the cutter, the equipment adopts high wear-resistant cutter. It is very easy to operate the equipment by using the touch screen control panel.
The equipment is widely used in the paper industry, paper products distributor and the packing and printing company.
Partial introduction
Technical Parameter
| Model | C-1400/1700/1900-1 |
| Model of cutting paper | The up knife is cut reciprocally and the down knife is fixed |
| The thickness of cutting paper | 50-500g |
| Max. scroll diameter | 1650mm |
| Max. paper cutting width | 1400mm/1700mm/1900mm |
| Cutting length range | 400~1600mm |
| Number of sheets | 1 roll |
| Cutting precision | Cutting length≤1000mm: +/-0.5mm, Cutting length>1000mm: +/-0.1% |
| Max. speed | 300cuts/min |
| Max. meter speed | 300m/min |
| Max. paper piling height | 1300mm |
| The request for air compressor | 0.8Mpa |
| Power consumption | 380V/220V×50Hz |
| Gross weight | 9000kgs/11000kgs/13000kgs |
| Full-load power | 23/25/33kw |
| Paper roll stand | 1SET |
| The passageway of paper | 1SET |
| Squaring system | 1SET |
| Roll cutting knife | 1SET |
| Electrical control system | 1SET |
| Servo drive system | 1SET |
| Conveyor | 1SET |
| touch screen | 1SET |
| Paper receiving table | 1SET |
Our company reserves the right to change technical parameters without further notice.
You may also be interested in the following products:
Copyright© 2021 LEANON Co.,Ltd. All Rights Reserved,Web Designed by Beboss.
